The Advantages of Using a Goplus Hydraulic Crimping Tool

hydraulic crimping tool

Hydraulic Crimping Tools are specialized pliers specially designed to crimp and fold metals such as aluminum and copper in different forms; the primary function of a hydraulic crimping tool is to crimp an exposed metal part until it closes on its end or crimps into a closed joint. They work well for shaping and shrinking metals such as aluminum and copper. As opposed to the mechanical method, when you apply pressure to the crimp a hydraulic spring action causes the crimp to close over an attached piece of metallic material until it snaps tightly into place. This type of crimping tool comes with a long handle, usually in the shape of an L, so that it is easier to handle.

The types of applications for a hydraulic crimping tool range from joining pieces of copper wire together to securing different kinds of connectors, like those used in vehicle wiring. The crimpers are also used to crimp various kinds of wires, like car batteries. Hydraulic Crimpers can be used to join copper cables into the right size, shape, and length and then soldered together to form chains. It is also possible to crimp together short cables. It is also possible to use a primer on bare wires.

Hydraulic Crimping Tool

A close up of a device

When it comes to using hydraulic crimping tools, you need to ensure that the jaws of the tool are wide enough to accommodate the length and diameter of the exposed connector or cable that you intend to crimp. Before starting to work, ensure that the jaws of the tool are clean, oiled, and completely free of any debris. Place the jaws of the tool over the connector and gently grip the two ends of the hose so that a good seal is maintained between the jaws and the hose. You should then twist the exposed end of the wire by hand to force the crimps to close. After ensuring that the crimps are all closed, you should push the hose into the jaws of the crimping tool and proceed to tighten the crimping tool.

There are many types of hydraulic crimping tools available in the market. There are single die varieties, double die varieties, and triple die varieties. All varieties of the tool have their own advantages and disadvantages, as well as the type of crimes that you can use for each variety of tool. Before choosing the right kind of tool, you should ensure that the crimes that you select for your application are ideal for the task that you intend to perform with the tool.

In the case of small cable systems that are used in households and small offices, it is advisable to use a single-die variety of hydraulic crimping tools. As far as the larger wire systems are concerned, there are two varieties that you can choose from – one that features double die construction and another that feature triple die construction. These two varieties of crimes are very suitable for large wire systems where the crimpers need to be changed to change the crimp sizes that have to be used in fitting the wires into the holes. The crimes that feature double and triple die construction are also very handy in connecting and disconnecting the wires from their connector housings. However, these kinds of hydraulic crimping tools require that you cut the cables manually using a sharp utility knife.

A Much Ado

A person standing in front of a truck

If the task that you intend to perform with the tool requires that you fit different sized wires into the holes and then change the crimpers to suit the wires, then the utility knife should not be used. It is best if the tool that you use has a blade that can be used to cut the cable manually and without much difficulty. Another disadvantage of using a utility knife to cut the cable is that the blade may puncture the insulation that surrounds the wires and this may create an accident. For this reason, you should always carry the right kind of tool along with you when you intend to perform the task at hand. Using an electric Crimping Tool, on the other hand, is more convenient because you do not need to change the crimpers to suit the size of the wires.

There are different types of industrial applications where the utilization of an electric or hydraulic crimping tool is required. One such application is when you want to convert bare metal into component mating. In this case, the components need to be manufactured on-site and then submitted for welding cables. There is a great deal of work pressure that is involved in this kind of application. For this reason, it is necessary to make sure that you carry all the necessary accessories with you whenever you operate the welding cables.

Final Words

Similarly, when you convert the bare copper cable to component mating, there is a lot of effort and work pressure involved. If you do not have the right kind of goals hydraulic wire crimping tool, then converting copper cable can prove to be a very difficult task. On the other hand, if you have the right tool, then you can convert all kinds of electrical and electronic cables to mating. This is one of the major advantages of using this type of tool.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter